How to Install Proxmox (Virtual Environment) on Debian 12

This guide will teach you how to install the Proxmox Server Virtualization platform on Debian 12.

Step 1: Update APT Cache

The first step is to update your system’s package lists by running the following apt command.

sudo apt update

Step 2: Configure Static IP Address

It’s imperative to set a static IP for our Proxmox server for obvious reasons. By default, the Debian IP configuration is set to use DHCP.

You can confirm this by checking your IP address.

ip a

The network configuration file in Debian is the /etc/network/interfaces file. You can preview it using the cat command as shown.

cat /etc/network/interfaces

As you can see, the default settings are configured to DHCP.

Open the configuration file using your preferred editor.

sudo nano /etc/network/interfaces

Add the following configuration and be sure to replace the IP address and subnet to reflect your environment’s IP subnet.

auto enp0s3
iface enp0s3 inet static
        address 192.168.2.103/24
        network 192.168.2.0
        broadcast 192.168.2.255
        gateway 192.168.2.1
        dns-nameservers 8.8.8.8

Save the changes and exit the configuration file. To apply the changes made, restart NetworkManager.

sudo systemctl restart NetworkManager

Step 3: Configure Hostname Resolution

The next step is to configure the hostname resolution. This entails setting up the hostname and updating the /etc/hosts file.

Use the hostnamectl command to set up a hostname as shown. Here, proxmox is the hostname of our system.

sudo hostnamectl set-hostname proxmox
exec bash

Next, access the /etc/hosts file using your text editor.

sudo nano /etc/hosts

Add your server’s IP and hostname for hostname resolution.

192.168.2.103  proxmox

Save the changes and exit.

Confirm the hostname and IP address associated with it as shown.

hostname
hostname --ip-address

Step 4: Add the Proxmox VE Repository

Before installing Proxmox, a few prerequisite packages are required to install using the following command.

sudo apt install curl software-properties-common apt-transport-https ca-certificates gnupg2 

With all the prerequisite packages installed, next, add the Proxmox repository to the sources.list.d directory.

sudo su -

Next, add the Proxmox repository as follows.

echo "deb [arch=amd64] http://download.proxmox.com/debian/pve bookworm pve-no-subscription" >
/etc/apt/sources.list.d/pve-install-repo.list

With the Proxmox repository in place, download and add the Proxmox VE repository key using the wget command.

wget https://enterprise.proxmox.com/debian/proxmox-release-bookworm.gpg -O /etc/apt/trusted.gpg.d/proxmox-release-bookworm.gpg  

Next, update the local APT cache and carry out a full upgrade.

apt update && apt full-upgrade

Step 5: Install the Proxmox Kernel

Once the upgrade is complete, install the Proxmox kernel, which is necessary since we will later remove the Linux kernel which Proxmox will not require.

apt apt install proxmox-default-kernel -y

Once the installation is complete, you will get the following output, a confirmation that the Proxmox kernel was successfully installed.

Step 6: Install the Proxmox Packages

To install Proxmox VE alongside other packages such as postfix – a mail transfer agent and chrony, run the following command:

sudo apt install proxmox-ve postfix open-iscsi chrony

This step takes quite a while, so just be patient as the installation progresses.

Along the way, you will be prompted to select the mail configuration type for Postfix. Select ‘Local only’ and hit ENTER.

Next, provide your preferred system mail name and press ENTER.

Thereafter, the installation will continue and wrap up without any issues.

Proxmox VE listens on TCP port 8006 and you can confirm this using the ss command.

sudo ss -tunelp | grep 8006

Step 7: Remove the Linux Kernel

Since Proxmox VE comes with its kernel, keeping the default Debian kernel can cause trouble upon upgrading, especially when dealing with point releases.

As such, it is recommended to purge the default Debian kernel as follows.

sudo apt remove linux-image-amd64 'linux-image-6.1*'

Next, update the GRUB configuration file.

sudo update-grub

The os-prober is a utility that scans disk partitions for operating systems and lists them on the GRUB entry. However, scanned partitions might also include those assigned to virtual machines. You surely don’t want to add those on the boot entry as well.

To prevent that from happening, uninstall the os-prober package:

sudo apt remove os-prober

Step 8: Access Proxmox VE Web Interface

Now reboot the system.
sudo reboot

On the GRUB screen, you will see the Proxmox VE entry. Just hit ENTER to proceed.

Now visit the following URL to access the Login dashboard.

https://your-ip-address:8006/

You will receive a warning page informing you that the connection is not private. Just click ‘Advanced’.

Then select proceed to ‘Your IP address’.

You will get a Proxmox VE login page. Login with your root credentials.

When logged in, the Proxmox should come to view as shown.

From here, you can create and manage your virtual machines, Linux containers, and other components such as storage, users, and networking.

Conclusion

And there you go. In this guide, we have demonstrated how to install Proxmox on Debian 12. Bear in mind that Proxmox VE is a bare-metal installer, and is best suited for installation on a physical server without any OS installed. Your feedback is much welcome.