×

How to Assemble Partitions as RAID Devices in Linux

How to Assemble Partitions as RAID Devices in Linux


The Linux Foundation launched the LFCS (Linux Foundation Certified Sysadmin) certification, a shiny chance for system administrators everywhere to demonstrate, through a performance-based exam, that they are capable of performing overall operational support on Linux systems: system support, first-level diagnosing and monitoring, plus issue escalation, when required, to other support teams.

The series will be titled Preparation for the LFCS (Linux Foundation Certified Sysadmin) Parts 1 through 33 and cover the following topics:

No. Title
Part 1 How to Use ‘Sed’ Command to Manipulate Files in Linux
Part 2 How to Install and Use Vi/Vim in Linux
Part 3 How to Compress Files & Directoires and Finding Files in Linux
Part 4 How to Partition Storage Devices in Linux
Part 5 How to Mount (Samba and NFS) Filesystems in Linux
Part 6 How to Assemble Partitions as RAID Devices and Create System Backups
Part 7 Managing System Startup Processes and Services (SysVinit, Systemd, and Upstart
Part 8 How to Manage User & Groups, File Permissions, and Sudo Access
Part 9 Linux Package Management with Yum, RPM, Apt, Dpkg, Aptitude, and Zypper
Part 10 Learning Basic Shell Scripting and Filesystem Troubleshooting
Part 11 How to Manage and Create LVM Using vgcreate, lvcreate, and lvextend Commands
Part 12 How to Explore Linux with Installed Help Documentations and Tools
Part 13 How to Configure and Troubleshoot Grand Unified Bootloader (GRUB)
Part 14 Monitor Linux Processes Resource Usage and Set Process Limits on a Per-User Basis
Part 15 How to Set or Modify Kernel Runtime Parameters in Linux Systems
Part 16 Implementing Mandatory Access Control with SELinux or AppArmor in Linux
Part 17 How to Set Access Control Lists (ACLs) and Disk Quotas for Users and Groups
Part 18 Installing Network Services and Configuring Automatic Startup at Boot
Part 19 An Ultimate Guide to Setting Up FTP Server to Allow Anonymous Logins
Part 20 Setup a Basic Recursive Caching DNS Server and Configure Zones for Domain
Part 21 How to Install, Secure, and Performance Tuning of MariaDB Database Server
Part 22 How to Install and Configure NFS Server for File System Sharing
Part 23 How to Setup Apache with Name-Based Virtual Hosting with SSL Certificate
Part 24 How To Setup an Iptables Firewall to Enable Remote Access to Services in Linux
Part 25 How to Turn a Linux into a Router to Handle Traffic Statically and Dynamically
Part 26 How to Setup Encrypted Filesystems and Swap Using Cryptsetup Tool
Part 27 How to Monitor System Usage, Outages, and Troubleshoot Linux Servers
Part 28 How to Setup a Network Repository to Install or Update Packages
Part 29 How to Audit Network Performance, Security, and Troubleshooting
Part 30 How to Install and Manage Virtual Machines and Containers
Part 31 Learn the Basics of Git to Manage Projects Efficiently
Part 32 A Beginner’s Guide to Configuring IPv4 and IPv6 Addresses in Linux
Part 33 A Beginner’s Guide to Creating Network Bonding and Bridging in Ubuntu

This post is Part 6 of a 33-tutorial series, here in this part, we will explain how to assemble partitions as RAID devices and create & manage system backups, that are required for the LFCS certification exam.

Understanding RAID in Linux

The technology known as Redundant Array of Independent Disks (RAID) is a storage solution that combines multiple hard disks into a single logical unit to provide redundancy of data and/or improve performance in read / write operations to disk.

However, the actual fault tolerance and disk I/O performance lean on how the hard disks are set up to form the disk array. Depending on the available devices and the fault tolerance/performance needs, different RAID levels are defined.

You can refer to the following RAID series article for know more detailed explanation of each RAID level.

Install mdadm in Linux

Our tool of choice for creating, assembling, managing, and monitoring our software RAIDs is called mdadm (short for multiple disks admin).

$ sudo apt install mdadm         [On Debian, Ubuntu and Mint]
$ sudo yum install mdadm         [On RHEL/CentOS/Fedora and Rocky/AlmaLinux]
$ sudo zypper install mdadm      [On OpenSUSE]    

Assembling Partitions as RAID Devices

The process of assembling existing partitions as RAID devices consists of the following steps.

1. Create a New Array using mdadm

If one of the partitions has been formatted previously or has been a part of another RAID array previously, you will be prompted to confirm the creation of the new array.

Assuming you have taken the necessary precautions to avoid losing important data that may have resided in them, you can safely type y and press Enter.

# mdadm --create --verbose /dev/md0 --level=stripe --raid-devices=2 /dev/sdb1 /dev/sdc1
Creating RAID Array

2. Check Array Creation Status

In order to check the array creation status, you will use the following commands – regardless of the RAID type. These are just as valid as when we are creating a RAID0 (as shown above), or when you are in the process of setting up a RAID5, as shown in the image below.

# cat /proc/mdstat
or 
# mdadm --detail /dev/md0	[More detailed summary]
Check RAID Array Status
Check RAID Array Status

3. Format RAID Device

Format the device with a filesystem as per your needs/requirements, as explained in Part 4 of this series.

4. Monitor RAID Array Service

Instruct the monitoring service to “keep an eye” on the array. Add the output of mdadm --detail --scan to /etc/mdadm/mdadm.conf (Debian and derivatives) or /etc/mdadm.conf (CentOS / openSUSE), like so.

# mdadm --detail --scan
Monitor RAID Array
Monitor RAID Array
# mdadm --assemble --scan 	[Assemble the array]

To ensure the service starts on system boot, run the following commands as root.

# systemctl start mdmonitor
# systemctl enable mdmonitor

5. Check RAID Disk Failure

In RAID levels that support redundancy, replace failed drives when needed. When a device in the disk array becomes faulty, a rebuild automatically starts only if there was a spare device added when we first created the array.

Check RAID Faulty Disk
Check RAID Faulty Disk

Otherwise, we need to manually attach an extra physical drive to our system and run it.

# mdadm /dev/md0 --add /dev/sdX1

Where /dev/md0 is the array that experienced the issue and /dev/sdX1 is the new device.

6. Disassemble a Working Array

You may have to do this if you need to create a new array using the devices – (Optional Step).

# mdadm --stop /dev/md0 		#  Stop the array
# mdadm --remove /dev/md0 		# Remove the RAID device
# mdadm --zero-superblock /dev/sdX1 	# Overwrite the existing md superblock with zeroes

7. Create Mail Alerts

You can configure a valid email address or system account to send alerts to (make sure you have this line in mdadm.conf). – (Optional Step)

MAILADDR root

In this case, all alerts that the RAID monitoring daemon collects will be sent to the local root account’s mailbox. One of such alerts looks like the following.

Note: This event is related to the example in STEP 5, where a device was marked as faulty and the spare device was automatically built into the array by mdadm. Thus, we “ran out” of healthy spare devices and we got the alert.

RAID Monitoring Alerts
RAID Monitoring Alerts

Understanding RAID Levels in Linux

Here’s a brief overview of common RAID levels:

RAID 0

The total array size is n times the size of the smallest partition, where n is the number of independent disks in the array (you will need at least two drives). Run the following command to assemble a RAID 0 array using partitions /dev/sdb1 and /dev/sdc1.

# mdadm --create --verbose /dev/md0 --level=stripe --raid-devices=2 /dev/sdb1 /dev/sdc1

Common Uses: Setups that support real-time applications where performance is more important than fault tolerance.

RAID 1 (aka Mirroring)

The total array size equals the size of the smallest partition (you will need at least two drives). Run the following command to assemble a RAID 1 array using partitions /dev/sdb1 and /dev/sdc1.

# mdadm --create --verbose /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1

Common Uses: Installation of the operating system or important subdirectories, such as /home.

RAID 5 (aka drives with Parity)

The total array size will be (n – 1) times the size of the smallest partition. The “lost” space in (n-1) is used for parity (redundancy) calculation (you will need at least three drives).

Note that you can specify a spare device (/dev/sde1 in this case) to replace a faulty part when an issue occurs. Run the following command to assemble a RAID 5 array using partitions /dev/sdb1, /dev/sdc1, /dev/sdd1, and /dev/sde1 as spare.

# mdadm --create --verbose /dev/md0 --level=5 --raid-devices=3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --spare-devices=1 /dev/sde1

Common uses: Web and file servers.

RAID 6 (aka Drives with Double Parity

The total array size will be (n*s)-2*s, where n is the number of independent disks in the array and s is the size of the smallest disk. Note that you can specify a spare device (/dev/sdf1 in this case) to replace a faulty part when an issue occurs.

Run the following command to assemble a RAID 6 array using partitions /dev/sdb1, /dev/sdc1, /dev/sdd1, /dev/sde1, and /dev/sdf1 as spare.

# mdadm --create --verbose /dev/md0 --level=6 --raid-devices=4 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde --spare-devices=1 /dev/sdf1

Common Uses: File and backup servers with large capacity and high availability requirements.

RAID 1+0 (aka Stripe of Mirrors)

The total array size is computed based on the formulas for RAID 0 and RAID 1 since RAID 1+0 is a combination of both. First, calculate the size of each mirror and then the size of the stripe.

Note that you can specify a spare device (/dev/sdf1 in this case) to replace a faulty part when an issue occurs. Run the following command to assemble a RAID 1+0 array using partitions /dev/sdb1, /dev/sdc1, /dev/sdd1, /dev/sde1, and /dev/sdf1 as spare.

# mdadm --create --verbose /dev/md0 --level=10 --raid-devices=4 /dev/sd[b-e]1 --spare-devices=1 /dev/sdf1

Common Uses: Database and application servers that require fast I/O operations.

Creating and Managing System Backups in Linux

It never hurts to remember that RAID with all its bounties IS NOT A REPLACEMENT FOR BACKUPS! Write it 1000 times on the chalkboard if you need to, but make sure you keep that idea in mind at all times.

Before we begin, we must note that there is no one-size-fits-all solution for system backups, but here are some things that you need to take into account while planning a backup strategy.

  • What do you use your system for? (Desktop or server? If the latter case applies, what are the most critical services – whose configuration would be a real pain to lose?)
  • How often do you need to take backups of your system?
  • What is the data (e.g. files/directories/database dumps) that you want to backup? You may also want to consider if you really need to backup huge files (such as audio or video files).
  • Where (meaning physical place and media) will those backups be stored?

1. Backup Drives Using dd Command

Backup entire drives with the dd command. You can either back up an entire hard disk or a partition by creating an exact image at any point in time. Note that this works best when the device is offline, meaning it’s not mounted and there are no processes accessing it for I/O operations.

The downside of this backup approach is that the image will have the same size as the disk or partition, even when the actual data occupies a small percentage of it.

For example, if you want to image a partition of 20 GB that is only 10% full, the image file will still be 20 GB in size. In other words, it’s not only the actual data that gets backed up, but the entire partition itself. You may consider using this method if you need exact backups of your devices.

Creating a Partition Image

# dd if=/dev/sda of=/system_images/sda.img
OR
--------------------- Alternatively, you can compress the image file --------------------- 
# dd if=/dev/sda | gzip -c > /system_images/sda.img.gz 

Restoring a Partition Image

# dd if=/system_images/sda.img of=/dev/sda
OR 
# gzip -dc /system_images/sda.img.gz | dd of=/dev/sda 

2. Backup Files Using tar Command

Backup certain files / directories with tar command – already covered in Part 3 of this series. You may consider using this method if you need to keep copies of specific files and directories (configuration files, users’ home directories, and so on).

2. Backup and Sync Files Using rsync Command

Synchronize files with the rsync command, which is a versatile remote (and local) file-copying tool. If you need to backup and synchronize your files to/from network drives, rsync is a go.

Whether you’re synchronizing two local directories or local < --- > remote directories mounted on the local filesystem, the basic syntax is the same.

Synchronizing Two Local Directories

# rsync -av source_directory destination directory

Where, -a recurse into subdirectories (if they exist), preserve symbolic links, timestamps, permissions, and original owner / group and -v verbose.

rsync Synchronizing Files
rsync Synchronizing Files

In addition, if you want to increase the security of the data transfer over the wire, you can use ssh over rsync.

Synchronizing Local → Remote Directories Over SSH

# rsync -avzhe ssh backups root@remote_host:/remote_directory/

This example will synchronize the backup directory on the local host with the contents of /root/remote_directory on the remote host.

Where the -h option shows file sizes in human-readable format, and the -e flag is used to indicate an SSH connection.

rsync Synchronize Remote Files
rsync Synchronize Remote Files

Synchronizing Remote → Local Directories Over SSH

In this case, switch the source and destination directories from the previous example.

# rsync -avzhe ssh root@remote_host:/remote_directory/ backups 

Please note that these are only 3 examples (most frequent cases you’re likely to run into) of the use of rsync. For more examples and usages of rsync commands can be found at the following article.

Summary

As a sysadmin, you need to ensure that your systems perform as well as possible. If you’re well prepared, and if the integrity of your data is well supported by storage technology such as RAID and regular system backups, you’ll be safe.

The LFCS eBook is available now for purchase. Order your copy today and start your journey to becoming a certified Linux system administrator!

Product Name Price Buy
The Linux Foundation’s LFCS Certification Preparation Guide $19.99 [Buy Now]

Last, but not least, please consider buying your exam voucher using the following links to earn us a small commission, which will help us keep this book updated.

If you have questions, comments, or further ideas on how this article can be improved, feel free to speak out below. In addition, please consider sharing this series through your social network profiles.



Source link